Enhanced Liquid System
Precise sample and reagent aspiration
Built in air bubble elimination prior to washing
High pressure interior probe wash
Carry-over <0.05%
  Economy Usage
Light-Spot Flatting Technology facilitates lower
reaction volume
24 hour non-stop refrigeration at 2-10°C
Minimum sample volume: 1.5 l
Reagent volume: 10 ~ 350 l
Cuvette Volume:120~360l
  Easy to perform maintenance
Front loaded reagent compartment for easier access
Easy access for routine maintenance and troubleshooting
Built in Step-by-Step maintenance guide
  Intelligent Probe System functions and smart protection
Supports methods with up to 4 reagents
Vertical and horizontal collision protection
Automatic System Recovery
Liquid level detection, clot detection
  User-friendly Interface
Real-time analytical and carousel status monitoring
Bi-directional LIS interface transmission
  Real-time QC Status Monitoring
Levy-Jennings chart and Twin-Plot chart
QC Out-of-Range real-time alarm
Customizable periodic QC reminder
  Traceable Test Results
Historic data recall from reagent/ calibrator/ control archive
Intuitive software, easy historical results
  Reflex Function
User-defined customizable reflexive assays
Multiple reflexive criteria may apply to a single assay
A single reflexive criteria may apply up to 20 assays
  Test Summary
Test summary reports & sample rerun available on all assays and Quality Assurance
Facilitate computation of total test costs
Error Log Export function -facilitate error report to engineers
Results Archive can be transferred to engineers for evaluation
Technical Specifications
System function
Fully automated, discrete, random access, STAT, urine and homogeneous immunoassays;STAT sample priority
Throughput: 400 photometric tests/hour, up to 240 tests/hour for ISE
Measuring principles: Absorbance Photometry, Turbidimetry
Methodology: End-point, Fixed-time, Kinetic, ISE (Optional) Single/Dual/Triple/Quadruple reagent chemistries, Monochromatic/Bichromatic
Programming: User defined profiles and calculation
Sample Handling
Sample tray: 90 positions for primary or secondary tubes and sample cups
Sample volume: 1.5~45 μl, step by 0.1μl
Sample probe: Liquid level detection, clot detection and collision protection
Probe cleaning: Interior and exterior automatic probe washing carry-over < 0.05%
Automatic sample dilution, Pre-dilution and post-dilution
Dilution with ratio up to 1: 150
Dilution vessel: Quartz cuvette
Internal bar code reader
Sample/Reagent barcode reading
including Codabar, ITF (Interleaved Two of Five), code128, code39,
UPC/EAN, Code93; Bi-directional LIS Interface transmission
ISE Module (optional)
Optional selection of K+, Na+, Cl-
Throughput: Up to 240 tests per hour
Reagent Handling
Reagent tray: 80 positions in refrigerated compartment (2~10°C)
Reagent volume: 10~350μl
Reagent probe: Liquid level detection, collision protection and inventory check
Probe cleaning: Interior and exterior automatic probe washing
Reaction System
Reaction rotor: Rotating tray, 90 cuvettes with automatic washing
Cuvette: Optical length 5mm
Reaction volume: 120~360μl
Operating temperature: 37°C
Temperature fluctuation: ±0.1°C
Mixing system: 2 independent mixers
Optical System
Light Source: Halogen-tungsten lamp
Photometer: Reversed optics, grating photometry
Wavelength: 340nm, 380nm, 412nm, 450nm, 505nm, 546nm, 570nm, 605nm, 660nm, 700nm, 740nm, 800nm
Absorbance range: 0~3.3Abs (10mm conversion)
Resolution: 0.0001Abs
Control and Calibration
Calibration mode: Linear (one-point, two-point and multi-point),Logit -Log 4P, Logit-Log 5P, Spline, exponential, Polynomial, Parabola
Control rules: Westgard multi-rule, Levy-Jennings, Cumulative sum check, twin plot
Operation Unit
Operation system: Windows 8
Interface: RS-232, Network Port, USB/ parallel port
Working Conditions
Power Supply: 200~240V, 50/60Hz, 1500VA
or 110~130V, 60Hz, 1500VA
Temperature: 15~30°C
Humidity: 35~85%
Water consumption: 20L/hour, De-ionized water
Dimension: 46in x 28in x 45in (W x D x H)
Weight: 661lb